LINE SET-UP

The line layout must be adapted to suit your boat. Normally both lines go to one side but this is a matter of choice.

For tiller steering the lines must come in at a convenient place from Port and Starboard of cockpit and attach to the tiller.

The lines run from the NORVANE to the wheel or tiller and should be as direct as possible with minimum slack or friction and should be easily accessible for quick release when required.

A drum is recommended for vessels with wheel steering.

The two sheave blocks, which are supplied with the unit, should be attached to the bent tube by means of the eyelets and positioned to suit your vessel

There are no concealed lines as they run above deck and are therefore easy to replace when necessary.

For best performance and minimum friction a good, non-stretch line should be used.

<< TOP >>